Picture 1 shows cutting jig for my bandsaw.

Picture 2 shows all the timber ready for cuting into segments.

Picture 3 shows a segment being sanded, although this is dificult to do with a camera in your hand.

Picture 4 shows a ring all glued up and in a large jubilee clip.

Picture 5 shows a ring being sanded flat on the belt sander.

Picture 6 shows all the rings sanded. I sand them round as well,

Picture 7 shows rings being glued and clamped.

Picture 8 shows outside being turned to shape, note tail stock support.

picture 9 shows a method of support for when you turn the bottom and turn the dovetail for rechucking.

Picture 10 The support used again for finishing the inside.

mk1 press, I made a better one see new additions for a rough how to.